Rosewill WIRELESS N ADAPTER RNX-N150UBE Guía de usuario descargar pdf (Pagina 40)

CHAPTER 4: USING GROOV ADMIN

groov Box User’s Guide

2. Click WLAN0.

3. Enter the Network Name (SSID)

The SSID is a text string from 1 to 32 characters used to uniquely identify the wireless network.

This should match the SSID of the access point you want to connect to.

NOTE: If the SSID contains one or more spaces, enclose the SSID with quotation marks. For example,

enter “Opto 22” instead of Opto 22.

4. Select the Encryption Type.

This is the type of encryption used to encrypt any packet sent or received between the access

point and the groov Box.

– None—No encryption used.

– WEP64—Use WEP encryption with a 5 digit ASCII or 10 digit hexadecimal key. WEP has

been deprecated by IEEE and should not be used in new installations.

– WEP128—Use WEP encryption with a 13 digit ASCII or 26 digit hexadecimal key.

NOTE: WEP is not secure and has been deprecated by the Institute of Electrical and Electronics

Engineers (IEEE). Do not use WEP in new installations unless it is the only option available.Use WPA

or WPA2 instead.

– WPA—Use TKIP encryption (RC4) with an 8 to 63 digit ASCII or 64 digit hexadecimal key.

– WPA2—Use CCMP encryption (AES) with an 8 to 63 digit ASCII or 64 digit hexadecimal

key.

5. Choose the Network Key Type.

Select ASCII or Hexadecimal keys. Typically, WEP uses hexadecimal keys and WPA uses ASCII

keys.

6. Enter the Network Key.

Use the key for the Encryption Type selected above. This is a write-only field.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 82 83

Sin comentarios

Rosewill WIRELESS N ADAPTER RNX-N150UBE Guía de usuario Pagina 40