Rosewill WIRELESS N ADAPTER RNX-N150UBE Guía de usuario descargar pdf (Pagina 39)

CONFIGURING NETWORK CONNECTIONS

groov Box User’s Guide

2. Click ETH1.

3. If the network has DNS and DHCP, select “From DHCP.” If it doesn’t, enter a static IP address and

Netmask.

NOTE: If you are using static addresses, ETH1 must be on a different subnet than ETH0.

4. Click Save.

Configuring Wireless Communications

If you want to use your

groov

Box on a wireless network, you must purchase and install a USB WiFi

adapter that has been tested and approved by Opto 22.

See Appendix D: Installing an Approved USB

WiFi Adapter.

You can configure the groov Box to connect to a wireless network through an access point using the

802.11b, 802.11g, and 802.11n protocols.

Before you begin, get the following information from your IT Department:

SSID—Name of the wireless network access point you want the groov Box to join

Security—Encryption type (WPA or WPA2), network key input type (hex or ASCII), and password

Password—To access the wireless network

1. With the groov Box connected via ETH0, click the Configure Network Interfaces icon in Quick

Start.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 82 83

Sin comentarios

Rosewill WIRELESS N ADAPTER RNX-N150UBE Guía de usuario Pagina 39