Rosewill T600N Guia de preparacion descargar pdf (Pagina 80)

T600N - Wireless Dual Band Gigabit Router

CONFIGURATION GUIDE

Port Triggering: Some applications, such as online games, videoconferencing and

VoIP telephony, require multiple ports for inbound and outbound traffic. If an

application requires both an incoming and an outgoing port simultaneously, it is

possible to configure static port forwarding to handle the packets. That is not an

optimal solution because a static IP address must be configured for each device.

With port triggering an application, local port or range of ports and a

communication protocol can be mapped to a specific public port. Sending packets

out over the local port triggers the router to open an incoming local port that is

mapped to the same public port and application as the outgoing local port(s). The

local application can communicate over the incoming and outgoing ports without

the need for creating a fixed address.

• Enable Port Triggering: Click to activate the function.

• Description Enter notes or details about the port triggered configuration.

• Popular Applications Select a default application or add a new one.

• Trigger Port Enter the application’s outbound port number(s).

• Trigger Type Select the protocol to use for port triggering from the

following: TCP, UDP or Both.

• Public Port Enter the inbound port(s) for the application in the following

format: 2300-2400 or 47624.

• Public Type Select the protocol to use for the inbound port from the

following: TCP, UDP or Both.

Click Apply to save the settings or Cancel to discard the changes.

Advanced – Port Triggering

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 98 99

Sin comentarios

Rosewill T600N Guia de preparacion Pagina 80