Rosewill R2-RAID Manual de usuario descargar pdf (Pagina 7)

SATAIII PCI-E RAID Controller Card - RC-230- User’s Manual

-7-

2. Unplug the power cord and remove your computer’s cover.

3. Locate to an empty PCI Express x4, x8, or x16 slot on the motherboard.

4. To install the board, carefully align the card’s bus connector with the selected

PCI-E slot on the motherboard. Push the board down firmly.

5. Attach your internal devices to the PCI-E SATA 6G Raid Card.

6. Replace the slot bracket’s holding screw to secure the card.

7. Replace the computer cover and reconnect the power cord.

2.3 Creating and Managing Virtual Disk

2.3.1 Creating Virtual Disks

This section describes the produce for creating virtual disks using the BIOS

Configuration Wizard.

To create a virtual disk:

1. In the Topology pane, scroll to HBA0: Marvell 0 and press Enter to select. A

menu pops-up, as shown in Figure 1. Select Configuration Wizard and press

Enter to begin creating the virtual disk.

Figure 1 Configuration Wizard

2. Press Space to select/unselect a disk a disk, as shown in Figure 2. Use the

arrow keys to scroll the list of free disks.

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Sin comentarios

Rosewill R2-RAID Manual de usuario Pagina 7