Rosewill RPLC-500KIT Manual de usuario descargar pdf (Pagina 22)

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual

-22-

and Device C will flash unevenly for 2 minutes.

4.2 Using the Utility

Scenario:

Devices A and B are located in Network N. Device C (the joiner) that is

located in another network attempts to join Network N. See

Do as follows to add Device C to Network N using the Utility:

1. Connect Device C to the network card of a PC.

2. Open the Utility. The Main tab page displays information about Device

C after connection succeeds.

3. Click the Privacy tab page. Enter a name in the Private Network Name

field.

4. Click Set Local Device Only. When the page shown as below

displayed, the setting success. Now Device C has been removed from

its logical network.

5. Press the pushbutton on Device A or B for less than 3 seconds, making

it the „adder‟.

6. Within 2 minutes, press the pushbutton on Device C (the „joiner‟) for

less than 3 seconds.

7. Wait for connection to complete.

The Power indicator on Device A (or Device B) and Device C will flash at 1

second intervals until the process succeeds or fails. It will illuminate steadily

on success. If an error occurs, the Power indicator on Device A (or Device B)

and Device C will flash unevenly for 2 minutes.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27

Sin comentarios

Rosewill RPLC-500KIT Manual de usuario Pagina 22