Rosewill RC-213 Manual de usuario descargar pdf (Pagina 10)

User Manual

eSATAII 1+1 PCIe RAID Card RC213

2. Select Create RAID set. Press Enter.

3. Select RAID 1 then press Enter.

4. Select Auto configuration. Press Enter.

5. Press Y to save your settings.

6. Press CTRL+E and then press Y to exit the setup.

7. Continue with conventional Fdisk and Format steps as if you are installing a conventional hard drive.

8. Your RAID configuration is complete. Please proceed to software installation section.

4.3. Creating a Mirrored-Striped Set (RAID 10)

1. As the BIOS boots, press CTRL+S or F4 to enter the raid bios utility.

2. Select Create RAID set. Press F2.

3. Select RAID 10 then press Enter.

4. Select Auto config. Press Enter.

5. Press Y and then press ESC to exit the setup.

6. Continue with conventional Fdisk and Format steps as if you are installing a conventional hard drive.

7. Your RAID configuration is complete. Please proceed to software installation section.

4.4. Creating Parity RAID (RAID 5)

1. As the BIOS boots, Press CTRL+S or F4 to enter the raid bios utility.

2. Select Create RAID set. Press Enter.

3. Select RAID 5 then press Enter.

4. Select Auto configuration. Press Enter.

5. Press Y to save your settings.

4.5. Creating JBOD Sets

1. As the BIOS boots, Press CTRL+S or F4 to enter the raid bios utility.

2. Select Create RAID set. Press Enter.

3. Select JBOD (Single) then press Enter.

4. Select JBOD Drives. Press Enter.

5. Select RAID size. Press Enter.

6. Press Y to save your settings.

4.6. Creating Spare Drive

1. As the BIOS boots, Press CTRL+S or F4 to enter the raid bios utility.

2. Select Create RAID set. Press Enter.

3. Select Spare Drive then press Enter.

4. Select Spare Drives. Press Enter.

5. Select RAID size. Press Enter.

6. Press Y to save your settings.

1 2 ... 5 6 7 8 9 10 11 12

Sin comentarios

Rosewill RC-213 Manual de usuario Pagina 10